enitesdefrzh-CNjakotrhiro-ROuk
Filters

Deep-drawing presses

ERFURT PKnZT VI 800 TS Double-action deep-drawing press

Y/M: 1983
Max. force of internal slide:500t distance to bottom dead center 12 mm Max. force of internal sli...
Details

Double-crank sheet stamping presses

ERFURT PKZV III 800/4000 FS Double crank sheet metal stamping press

Y/M: 1988
CAPACITY, TON 800 NUMBER OF STROKES PER MINUTE 14 MAX DISTANCE BETWEEN TABLE AND SLIDER, MM 120...
Details

ERFURT PKZV I 1250 FS Double crank sheet stamping press

Y/M: 1981
Number of connecting points of the ram: 4 Max. ram force: 1250 tons Slide stroke: 630 mm Slide...
Details

TMP Voronezh K3044V, 2500T Sheet stamping press

Y/M: 1981
Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between tabl...
Details

TMP Voronezh K3546, 4000T Double-crank single-action closed press

Y/M: 1982
Nominal force: 4000 tons Slider's undershoot to BDC: 10 mm Slider stroke: 630 mm Frequency of ...
Details

ERFURT PKZZ 250 Double-crank sheet stamping press

Y/M: 1980
Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of ...
Details

KALININ FACTORY KA3534 250T Two-crank press of single action, closed

Y/M: 1980
Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Di...
Details

KALININ FACTORY KB3537, 500T Double-crank sheet stamping press

Y/M: 1980
Nominal force: 500 ton Slide stroke: 250 mm Slide strokes per minute: 25 Table dimensions: 140...
Details

TMP K3540 1000TN Sheet stamping press

Y/M: 1974
Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram ad...
Details

KALININ K3535A,315t Sheet stamping press

Y/M: 1981
Capacity (ton): 315 | Table size, mm: 2500 x 1250 | Slider stroke, mm: 400 | Shut height,mm: 750 | Strokes ...
Details

ERFURT PKZZ III 250 1 FS Double-crank sheet stamping presses

Y/M: 1981
Max. slide force (12,5 mm till the end of stroke): 250 tons Allowable slide force (160 mm till th...
Details

ERFURT PKZZ I 1250 Straight side sheet stamping press

Y/M: 1985
Max. slider force at the distance of 12,5 mm in the lower dead point: 1250 ton Slider force at th...
Details

Voronezh KB3539 800T SHEET METAL MECHANICAL PRESS

Y/M: 1982
Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment st...
Details

KALININ K3535A,315t Sheet stamping press

Y/M: 1986
Capacity (ton): 315 | Table size, mm: 2500 x 1250 | Slider stroke, mm: 400 | Shut height,mm: 750 | Strokes ...
Details

Ravne DE315 (2500x1400) Double crankshaft mechanical press

Y/M: 1990
Capacity 315 tons Slider stroke 400mm Number of strokes per minute 18 Table dimensions 2500 x 140...
Details

RAVNE DE-250 (2500x1250)

Y/M: 1975
Capacity: 250 ton Slider stroke: 400 mm Number of strokes per minute: 25 Table dimensions: 2500x1...
Details

TMP VORONEZH KA3132A.01 (160t) Press two-crank simple action open

Y/M: 1988
Nominal force, kN 1600 Slider stroke, mm 250 The distance between the table and the slider, mm 61...
Details

KALININ STANKO KB3534A, 250TN Two-crank stamping press

Y/M: 1986
Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distan...
Details

ERFURT PKZZ 630/3150 sheet stamping press

Y/M: 1964
Pressure 630 t distance between columns 3150 mm stroke of slide 500 mm ram adjustmen 140 mm table...
Details

ERFURT PKZZ IV 500/2800 Sheet stamping pres

Y/M: 1978
Capacity 500 tons Speed 20 spm Bed area 2800 x 1800mm Ram area 2800 x 1700mm Stroke 500mm Die hei...
Details

RAVNE DE 500 Sheet stamping press

Y/M: 1976
The force of 500 tons. stroke 305 mm. Adjust slide bar 254 mm. Distance between table and slide 4...
Details

CLEARING F4400-160 (400 sT) SHEET STAMPING PRESS

Y/M: 1952
Capacity,short ton 400 (362,87 TN) Slide stroke, mm 609.6 mm Number stroke min-10 Shut height adj...
Details

Voronezh KA3540,1000TN MECHANICAL SHEET STAMPING PRESS

Y/M: 1988
(side-front moving table) Nominal force: 1000 ton Slide stroke: 400 mm Continuous slide strokes p...
Details

Eccentric Press - Single Column

1985 ERFURT PEE-250 Eccentric Press - Single Column

Y/M: 1980
Pressure: 250 ton Throat: 400 mm Holes in the table: 160 mm Ram stroke: 36,126 mm Number of strok...
Details

ERFURT PEE-250 Eccentric Press - Single Column

Y/M: 1985
Pressure: 250 ton Throat: 400 mm Holes in the table: 160 mm Ram stroke: 36,126 mm Number of strok...
Details

Four-crank sheet stamping presses

TMP K4040, 1000T Closed four-crank sheet stamping press

Y/M: 1985
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of ...
Details

TMP Voronezh KA4537,500T Four crank single action press

Y/M: 1980
Capacity, ton 500 Rated distance of slide above bottom, mm 12 Slide stroke, mm 630 Continuous run...
Details

TMP VORONEZH K665 (800T) 4–crank closed simple-action press

Y/M: 1967
Nominal force: 8000 kN Slide stroke: 800 mm Distance between table and slide: 1500 mm Main drive ...
Details

TMP VORONEZH K664 500 T 4-crank closed simple-action stamping press

Y/M: 1969
Nominal effort kN 5000 Slide stroke, mm 630 The distance between table and slider, mm 1400 Main d...
Details

Horizontal Hydraulic press

ODESSAPRESSMASH P6738, 630T Horizontal Hydraulic press for pressing of wheelsets

Y/M: 1972
Press capacity, ton-forces 630 Fluid working pressure, MPa 20 Max. stroke of main cylinder plun...
Details

Hydraulic Press Single-column

STANKO P6330 100T Hydraulic Press Single-column

Y/M: 1980
Rated force, kN 1000 Slider stroke, 500 mm Distance between table and slider, mm 750 Main engi...
Details

Powder Compacting Presses

ORIENTANKPRESS OPC - 60A Molding press

Y/M: 2020
Pressing force max KN 600 Withdrawal force max KN 300 Die Supporting force max KN 300 Die retu...
Details

Dorst TPA-180 Powder Compacting Press

Y/M: 1978
Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressi...
Details

EPG CHINA EPM-60A Renewed Automatic Powder Compacting Press

Y/M: 2014
Press capacity: max. 60 t Stroke of the punch: 125 mm Filling height: max. 110 mm Motor: 15 kW...
Details

Dorst TPA-45 Powder Compacting Press

Y/M: 2004
Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t ...
Details

Dorst TPA-45 Automatic Powder Compacting Presses

Y/M: 1975
Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t ...
Details

BUSSMANN-SIMETAG HPM 60 Powder Compacting Press

Y/M: 1985
Press capacity: max. 60 t Retraction force of upper ram: 30 t Max force of upper ram in pressur...
Details

Dorst TPA-180 Automatic Powder Compacting Presses

Y/M: 1986
Мах. pressing power short tons 200 Мах. ejection power short tons 165 Upper ram stroke inches 8...
Details

RAILWAY LATHE

ODESSAPRESSMASH P6738, 630T Horizontal Hydraulic press for pressing of wheelsets

Y/M: 1972
Press capacity, ton-forces 630 Fluid working pressure, MPa 20 Max. stroke of main cylinder plun...
Details

Screw press

STANKO F1732-160t Screw press with arc stator drive

Y/M: 1988
Nominal force, kN 1600 Slider stroke, mm 320 Distance between table and slide, mm 320 Distance...
Details

STANKO FB1732 - 160t Screw press with arc stator drive

Y/M: 1980
Nominal force, kN 1600 Slider stroke, mm 320 Distance between table and slide, mm 320 Distance...
Details

Transfer presses

AIDA FT2-40 Transmax press

Y/M: 1974
Effort between stands 400 tons Number of positions incl. cutting position - 7 Maximum force at ea...
Details
12244896